Robotics Technicians
Medium42.51%
Salary Range
Low (10th %)$44,210
Median$65,080
High (90th %)$104,690
AI Prompt Guides for Robotics Technicians
Unlock expert prompt guides tailored for this Robotics Technicians. Get strategies to boost your productivity and results with AI.
AI Prompt Tool for Robotics Technicians
Experiment with and customize AI prompts designed for this occupation. Try, edit, and save prompts for your workflow.
Build, install, test, or maintain robotic equipment or related automated production systems.
The occupation of "Robotics Technicians" currently has an automation risk of 42.5%, with a base risk measured at 43.2%. The primary reason for this moderate risk is that a significant portion of the tasks performed by robotics technicians involve activities that are themselves highly automatable. Among the most automatable tasks are evaluating the efficiency and reliability of industrial robotic systems, a process that increasingly leverages advanced diagnostic software capable of recalibration and reprogramming. Additionally, making repairs to robots or peripheral equipment—such as swapping out defective circuit boards or sensors—can, in many instances, be standardized and handled by automated maintenance systems or self-diagnosing robots. Troubleshooting robotic systems using knowledge of microprocessors, programmable controllers, and related subsystems also faces automation from intelligent analytic tools that quickly and accurately identify system issues. However, not all aspects of the role are equally susceptible to automation, and there are key areas where human expertise remains vital, reducing overall risk. The most resistant tasks include developing three-dimensional simulations of automation systems, which requires a high degree of creativity, contextual awareness, and engineering acumen. Maintaining inventories of robotic production supplies, such as sensors or cables, although somewhat repetitive, still involves logistical judgment and adaptability that current automation systems handle less efficiently. Similarly, inspecting installation sites often necessitates situational interpretation and problem-solving in dynamic or unpredictable environments—situations where human technicians outperform machines. The bottleneck skills contributing to resistance against full automation in this occupation are anchored in originality, with skill levels noted at 3.0% and 3.3%. Originality is essential for adapting to new challenges, designing innovative solutions, and interpreting non-routine problems—qualities that even advanced AI and robotic systems struggle to replicate. These creative and problem-solving components ensure that while a considerable share of robotic technician duties may become automated in the future, the need for human involvement in complex, adaptive, or innovative tasks remains a significant safeguard, moderating the overall automation risk for this occupation.
Filter by Automatable Status
Evaluate the efficiency and reliability of industrial robotic systems, reprogramming or calibrating to achieve maximum quantity and quality.
Partially Automatable
Make repairs to robots or peripheral equipment, such as replacement of defective circuit boards, sensors, controllers, encoders, or servomotors.
Non-Automatable
Troubleshoot robotic systems, using knowledge of microprocessors, programmable controllers, electronics, circuit analysis, mechanics, sensor or feedback systems, hydraulics, or pneumatics.
Partially Automatable
Install, program, or repair programmable controllers, robot controllers, end-of-arm tools, or conveyors.
Partially Automatable
Maintain service records of robotic equipment or automated production systems.
Automatable
Modify computer-controlled robot movements.
Partially Automatable
Perform preventive or corrective maintenance on robotic systems or components.
Partially Automatable
Align, fit, or assemble components, using hand tools, power tools, fixtures, templates, or microscopes.
Non-Automatable
Attach wires between controllers.
Non-Automatable
Build or assemble robotic devices or systems.
Non-Automatable
Document robotics test procedures and results.
Partially Automatable
Install new robotic systems in stationary positions or on tracks.
Non-Automatable
Program complex robotic systems, such as vision systems.
Partially Automatable
Develop robotic path motions to maximize efficiency, safety, and quality.
Partially Automatable
Fabricate housings, jigs, fittings, or fixtures, using metalworking machines.
Partially Automatable
Inspect installation sites.
Partially Automatable
Maintain inventories of robotic production supplies, such as sensors or cables.
Partially Automatable
Develop three-dimensional simulations of automation systems.
Partially Automatable
Test performance of robotic assemblies, using instruments such as oscilloscopes, electronic voltmeters, or bridges.
Automatable
Train customers or other personnel to install, use, or maintain robots.
Partially Automatable
Assist engineers in the design, configuration, or application of robotic systems.
Partially Automatable
Train robots, using artificial intelligence software or interactive training techniques, to perform simple or complex tasks, such as designing and carrying out a series of iterative tests of chemical samples.
Partially Automatable
Reading ComprehensionActive ListeningLearning StrategiesMonitoringComplex Problem SolvingOperations MonitoringEquipment MaintenanceSystems AnalysisManagement of Personnel ResourcesWritingSpeakingMathematicsScienceCritical ThinkingActive LearningSocial PerceptivenessCoordinationPersuasionNegotiationInstructingService OrientationOperations AnalysisTechnology DesignEquipment SelectionInstallationProgrammingOperation and ControlTroubleshootingRepairingQuality Control AnalysisJudgment and Decision MakingSystems EvaluationTime ManagementManagement of Financial ResourcesManagement of Material Resources
Arm-Hand SteadinessAuditory AttentionCategory FlexibilityControl PrecisionDeductive ReasoningDepth PerceptionDynamic FlexibilityDynamic StrengthExplosive StrengthExtent FlexibilityFar VisionFinger DexterityFlexibility of ClosureFluency of IdeasGlare SensitivityGross Body CoordinationGross Body EquilibriumHearing SensitivityInductive ReasoningInformation OrderingManual DexterityMathematical ReasoningMemorizationMultilimb CoordinationNear VisionNight VisionNumber FacilityOral ComprehensionOral ExpressionOriginalityPerceptual SpeedPeripheral VisionProblem SensitivityRate ControlReaction TimeResponse OrientationSelective AttentionSound LocalizationSpatial OrientationSpeech ClaritySpeech RecognitionSpeed of ClosureSpeed of Limb MovementStaminaStatic StrengthTime SharingTrunk StrengthVisual Color DiscriminationVisualizationWrist-Finger SpeedWritten ComprehensionWritten Expression
Therapy and CounselingAdministration and ManagementAdministrativeEconomics and AccountingSales and MarketingCustomer and Personal ServicePersonnel and Human ResourcesProduction and ProcessingFood ProductionComputers and ElectronicsEngineering and TechnologyDesignBuilding and ConstructionMechanicalMathematicsFine ArtsPhilosophy and TheologyPublic Safety and SecurityPhysicsChemistryBiologyPsychologySociology and AnthropologyGeographyMedicine and DentistryForeign LanguageEnglish LanguageEducation and TrainingTelecommunicationsCommunications and MediaTransportationHistory and ArcheologyLaw and Government
Monitoring Processes, Materials, or SurroundingsGetting InformationInspecting Equipment, Structures, or MaterialsIdentifying Objects, Actions, and EventsJudging the Qualities of Objects, Services, or PeopleProcessing InformationEvaluating Information to Determine Compliance with StandardsAnalyzing Data or InformationMaking Decisions and Solving ProblemsThinking CreativelyUpdating and Using Relevant KnowledgeDeveloping Objectives and StrategiesScheduling Work and ActivitiesOrganizing, Planning, and Prioritizing WorkPerforming General Physical ActivitiesHandling and Moving ObjectsControlling Machines and ProcessesDocumenting/Recording InformationDrafting, Laying Out, and Specifying Technical Devices, Parts, and EquipmentInterpreting the Meaning of Information for OthersCommunicating with Supervisors, Peers, or SubordinatesCommunicating with People Outside the OrganizationEstablishing and Maintaining Interpersonal RelationshipsAssisting and Caring for OthersSelling or Influencing OthersResolving Conflicts and Negotiating with OthersPerforming for or Working Directly with the PublicCoordinating the Work and Activities of OthersDeveloping and Building TeamsTraining and Teaching OthersRepairing and Maintaining Mechanical EquipmentGuiding, Directing, and Motivating SubordinatesCoaching and Developing OthersProviding Consultation and Advice to OthersPerforming Administrative ActivitiesStaffing Organizational UnitsMonitoring and Controlling ResourcesEstimating the Quantifiable Characteristics of Products, Events, or InformationOperating Vehicles, Mechanized Devices, or EquipmentWorking with ComputersRepairing and Maintaining Electronic Equipment
JavaScriptAdaCPythonAutodesk AutoCADC#C++Ladder LogicCODESYSKeb Combivis StudioLinuxSiemens SIMATIC STEP 7Siemens SIMATIC WinCCOracle JavaWindows Embedded CompactMicrosoft ProjectDatabase softwareStructured query language SQLUNIXWord processing softwareComputer aided design CAD softwareDassault Systemes CATIABentley MicroStationSpreadsheet softwareDassault Systemes SolidWorksGitSAP softwareSimulation softwareMathWorks SimulinkAnalytical softwareFANUC Robotics Diagnostic Resource Center DRCFANUC Robotics HandlingToolFANUC Robotics iRCalibration Vision SuiteFANUC Robotics iRVisionFANUC Robotics SpotTool+FANUC Robotics Through Arc Seam Tracking TASTLogic Design RoboLogixMicrosoft WindowsThe MathWorks MATLABMicrosoft WindowsThe MathWorks MATLABCAutodesk AutoCADLadder LogicCODESYSKeb Combivis StudioSiemens SIMATIC STEP 7Windows Embedded CompactC#Variable frequency drive VFD softwareC++Microsoft ProjectMicrosoft WordDatabase softwareStructured query language SQLLinuxOracle JavaDassault Systemes CATIAUNIXWord processing softwareAVEVA InTouch HMIBentley MicroStationSpreadsheet softwareComputer aided manufacturing CAM softwareGitAdaSimulation softwareAnalytical softwareFANUC Robotics HandlingToolFANUC Robotics iRVisionFANUC Robotics SpotTool+Logic Design RoboLogixABB RobotStudioFANUC Robotics Dual Check Safety DCS Position and Speed CheckFANUC Robotics MultiARM SystemsFANUC Robotics Torchmate 3Microsoft OutlookJavaScriptFANUC Robotics iRCalibration Vision SuiteFANUC Robotics MultiARM SystemsSupervisory control and data acquisition SCADA softwareSupervisory control and data acquisition SCADA softwareComputer aided design CAD softwareHuman machine interface HMI softwareDassault Systemes SolidWorksMathWorks SimulinkProgrammable logic controller PLC softwareFANUC Robotics Through Arc Seam Tracking TASTComputer aided manufacturing CAM softwareAVEVA InTouch HMIHuman machine interface HMI softwareProgrammable logic controller PLC softwareSiemens SIMATIC WinCCVariable frequency drive VFD softwareFANUC Robotics Diagnostic Resource Center DRCABB RobotStudioFANUC Robotics Dual Check Safety DCS Position and Speed CheckFANUC Robotics ArcToolFANUC Robotics ArcToolFANUC Robotics Torchmate 3Microsoft PowerPointPythonMicrosoft ExcelMicrosoft ExcelMicrosoft Office softwareMicrosoft Office softwareMicrosoft OutlookMicrosoft PowerPointMicrosoft WordSAP software
Electrical Engineers
Medium51.39%
Research, design, develop, test, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, military, or scientific use.
Electronics Engineers, Except Computer
Medium47.85%
Research, design, develop, or test electronic components and systems for commercial, industrial, military, or scientific use employing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
Mechanical Engineers
Medium50.83%
Perform engineering duties in planning and designing tools, engines, machines, and other mechanically functioning equipment. Oversee installation, operation, maintenance, and repair of equipment such as centralized heat, gas, water, and steam systems.
Mechatronics Engineers
Medium50.13%
Research, design, develop, or test automation, intelligent systems, smart devices, or industrial systems control.
Robotics Engineers
Medium49.96%
Research, design, develop, or test robotic applications.
Aerospace Engineering and Operations Technologists and Technicians
Medium35.83%
Operate, install, adjust, and maintain integrated computer/communications systems, consoles, simulators, and other data acquisition, test, and measurement instruments and equipment, which are used to launch, track, position, and evaluate air and space vehicles. May record and interpret test data.
Electrical and Electronic Engineering Technologists and Technicians
Medium44.30%
Apply electrical and electronic theory and related knowledge, usually under the direction of engineering staff, to design, build, repair, adjust, and modify electrical components, circuitry, controls, and machinery for subsequent evaluation and use by engineering staff in making engineering design decisions.
Electro-Mechanical and Mechatronics Technologists and Technicians
Medium46.60%
Operate, test, maintain, or adjust unmanned, automated, servomechanical, or electromechanical equipment. May operate unmanned submarines, aircraft, or other equipment to observe or record visual information at sites such as oil rigs, crop fields, buildings, or for similar infrastructure, deep ocean exploration, or hazardous waste removal. May assist engineers in testing and designing robotics equipment.
Industrial Engineering Technologists and Technicians
Medium50.78%
Apply engineering theory and principles to problems of industrial layout or manufacturing production, usually under the direction of engineering staff. May perform time and motion studies on worker operations in a variety of industries for purposes such as establishing standard production rates or improving efficiency.
Mechanical Engineering Technologists and Technicians
Medium48.38%
Apply theory and principles of mechanical engineering to modify, develop, test, or adjust machinery and equipment under direction of engineering staff or physical scientists.
Automotive Engineering Technicians
Medium49.22%
Assist engineers in determining the practicality of proposed product design changes and plan and carry out tests on experimental test devices or equipment for performance, durability, or efficiency.
Calibration Technologists and Technicians
Medium50.00%
Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems.
Photonics Technicians
Medium49.31%
Build, install, test, or maintain optical or fiber optic equipment, such as lasers, lenses, or mirrors, using spectrometers, interferometers, or related equipment.
Lighting Technicians
Low29.69%
Set up, maintain, and dismantle light fixtures, lighting control devices, and the associated lighting electrical and rigging equipment used for photography, television, film, video, and live productions. May focus or operate light fixtures, or attach color filters or other lighting accessories.
Avionics Technicians
Low28.44%
Install, inspect, test, adjust, or repair avionics equipment, such as radar, radio, navigation, and missile control systems in aircraft or space vehicles.
Electrical and Electronics Installers and Repairers, Transportation Equipment
Low26.36%
Install, adjust, or maintain mobile electronics communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other mobile equipment.
Electrical and Electronics Repairers, Commercial and Industrial Equipment
Medium43.09%
Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
Electromechanical Equipment Assemblers
Low30.05%
Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkage, actuators, and appliances.
Computer Numerically Controlled Tool Operators
Medium58.43%
Operate computer-controlled tools, machines, or robots to machine or process parts, tools, or other work pieces made of metal, plastic, wood, stone, or other materials. May also set up and maintain equipment.
Computer Numerically Controlled Tool Programmers
High68.97%
Develop programs to control machining or processing of materials by automatic machine tools, equipment, or systems. May also set up, operate, or maintain equipment.
Aerospace Engineers
Medium49.06%
Perform engineering duties in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.
Computer Hardware Engineers
Medium46.34%
Research, design, develop, or test computer or computer-related equipment for commercial, industrial, military, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
Radio Frequency Identification Device Specialists
Medium48.06%
Design and implement radio frequency identification device (RFID) systems used to track shipments or goods.
Manufacturing Engineers
Medium46.99%
Design, integrate, or improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
Automotive Engineers
Medium48.94%
Develop new or improved designs for vehicle structural members, engines, transmissions, or other vehicle systems, using computer-assisted design technology. Direct building, modification, or testing of vehicle or components.
Microsystems Engineers
Medium45.90%
Research, design, develop, or test microelectromechanical systems (MEMS) devices.
Photonics Engineers
Medium48.01%
Design technologies specializing in light information or light energy, such as laser or fiber optics technology.
Electrical and Electronics Drafters
Medium56.65%
Prepare wiring diagrams, circuit board assembly diagrams, and layout drawings used for the manufacture, installation, or repair of electrical equipment.
Mechanical Drafters
Medium57.37%
Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, fastening methods, and other engineering information.
Nanotechnology Engineering Technologists and Technicians
Medium51.17%
Implement production processes and operate commercial-scale production equipment to produce, test, or modify materials, devices, or systems of unique molecular or macromolecular composition. Operate advanced microscopy equipment to manipulate nanoscale objects. Work under the supervision of nanoengineering staff.
Non-Destructive Testing Specialists
Medium44.70%
Test the safety of structures, vehicles, or vessels using x-ray, ultrasound, fiber optic or related equipment.
Remote Sensing Scientists and Technologists
Medium43.98%
Apply remote sensing principles and methods to analyze data and solve problems in areas such as natural resource management, urban planning, or homeland security. May develop new sensor systems, analytical techniques, or new applications for existing systems.
Remote Sensing Technicians
Medium60.88%
Apply remote sensing technologies to assist scientists in areas such as natural resources, urban planning, or homeland security. May prepare flight plans or sensor configurations for flight trips.
Audio and Video Technicians
Medium57.78%
Set up, maintain, and dismantle audio and video equipment, such as microphones, sound speakers, connecting wires and cables, sound and mixing boards, video cameras, video monitors and servers, and related electronic equipment for live or recorded events, such as concerts, meetings, conventions, presentations, podcasts, news conferences, and sporting events.
Broadcast Technicians
Medium59.28%
Set up, operate, and maintain the electronic equipment used to acquire, edit, and transmit audio and video for radio or television programs. Control and adjust incoming and outgoing broadcast signals to regulate sound volume, signal strength, and signal clarity. Operate satellite, microwave, or other transmitter equipment to broadcast radio or television programs.
Sound Engineering Technicians
Medium50.93%
Assemble and operate equipment to record, synchronize, mix, edit, or reproduce sound, including music, voices, or sound effects, for theater, video, film, television, podcasts, sporting events, and other productions.
Camera Operators, Television, Video, and Film
Medium41.02%
Operate television, video, or film camera to record images or scenes for television, video, or film productions.
Computer, Automated Teller, and Office Machine Repairers
Medium45.35%
Repair, maintain, or install computers, word processing systems, automated teller machines, and electronic office machines, such as duplicating and fax machines.
Electrical and Electronics Repairers, Powerhouse, Substation, and Relay
Medium47.64%
Inspect, test, repair, or maintain electrical equipment in generating stations, substations, and in-service relays.
Medical Equipment Repairers
Medium44.39%
Test, adjust, or repair biomedical or electromedical equipment.
Team Assemblers
Medium51.70%
Work as part of a team having responsibility for assembling an entire product or component of a product. Team assemblers can perform all tasks conducted by the team in the assembly process and rotate through all or most of them, rather than being assigned to a specific task on a permanent basis. May participate in making management decisions affecting the work. Includes team leaders who work as part of the team.